Lifestyle

8 Things to Do When Your Basement Floods: Helping Dallas Homeowners

If water damage is a concern in your home, then you should know that water can not only destroy the things that are on the surface, but it can also cause mold and mildew to grow if left untreated. In this blog post, we will discuss eight steps to take when water gets into your basement, so you know what to do when water damages your Dallas home!

1. Turn off the power to your home

If water damages your home’s electrical system, then you will want to turn off the power before it gets worse and causes even more damage. After turning off the power, make sure not to touch any wet substances with your hands because water conducts electricity!

If there is standing water on the floor where a washing machine or dishwasher was located, then immediately contact an electrician that can test out of the outlets are safe for use again after they have been repaired. In addition to checking all appliances for water-damaged cords, look around at other parts of your basement such as behind refrigerators and freezers for water damage.

2. Shut off water valves for sinks, toilets, and washing machines

The water that has been causing your basement to flood might have come from a broken pipe in the wall or ceiling, so after you’ve turned off water valves, then turn on faucets and look for any signs of water coming out again. This could mean there’s a crack somewhere in the pipes where water can leak through into your home again if not repaired sooner rather than later! If at all possible, try to find areas throughout your house with water damage so it doesn’t get worse over time when nothing has been done about it yet.

3. If you have a sump pump, turn it on

Turn on your sump pump if you have one in your water-logged basement to start pumping water back outside. If the water is too high, then just turn on a nearby faucet so that water can drain from there instead of directly into the sump pump’s tube.

4. Clean up as much water as possible using towels or mops

As water levels decrease from the water-logged basement, you can use towels or mops to soak up any remaining water. Always be sure to get as much water out of there as possible so that mold doesn’t spread throughout your home’s foundation.

5. Get any wet items – such as furniture, carpeting, insulation – off-site before mold can set in

Before water damage sets in and mold spreads, you need to take all wet items out of the basement as soon as possible. For example, if water damaged your furniture or carpeting, move it into a garage or outdoor area outside of the home’s foundation so that mold doesn’t start growing on those items.

6. Call a professional to clean up and dry out your flooded basement

You should also consider hiring a professional water damage company in Dallas to help with this process if needed. They will be able to thoroughly clean and dry out the water damage in your basement so that mold doesn’t start growing there. They will also make sure to water seal your basement to prevent water from coming back into the room.

7. Check with your homeowners insurance company about coverage for flooding damages

You should also consider checking with your homeowners insurance company to see if there is water damage coverage available for the water damage that occurred.

This will help you get back into your home as quickly as possible and start repairing any water damages that may have been caused by the flooding in Dallas, TX. Be aware that you may have to take pictures of the water damage and send them in along with an inspection before you can receive any help from your insurance company.

8. Prevent further flooding by repairing leaky pipes and installing backflow prevention devices

In order to prevent water damage in the future, you should have any leaky pipes repaired as quickly as possible.

You can also prevent water from entering your home by installing backflow prevention devices that will help keep water out of your basement even if there is flooding outside.

Back to top button